If you’ve ever worked in construction, tree service, facility maintenance, or event setup, you know how critical towable aerial work platforms (AWPs) are for getting work done safely at height. But here’s a question I hear all the time from prospective buyers, operators, and even other equipment vendors: “What size vehicle do I actually need to tow my towable AWP?” As a supplier of towable AWPs, I’ve spent years walking customers through this decision, and it’s not just about hitching a trailer to any truck or SUV. Skip the guesswork—let’s break this down by what actually matters, from weight ratings to real-world use cases, so you don’t end up stuck on a job site with a rig that can’t pull your AWP. Towable Aerial Work Platforms

First, let’s start with the basics: towable AWPs are self-contained aerial lifts that run on electricity, gas, or diesel, with collapsible frames and axles designed to be towed behind a standard vehicle. Unlike large boom lifts that need a dedicated flatbed truck, these are compact enough to hit the road on a 10-foot or 12-foot trailer, which means they’re popular for small crews, residential jobs, and multiple-site work. But their weight is non-negotiable here. The first rule of towing safety is matching your vehicle’s towing capacity to the total weight you’re pulling, and that includes more than just the AWP itself.
Let’s talk weight classes first, because this is where most people go wrong. Towable AWPs aren’t all the same size, and their operating weights vary a lot. Our smallest towable AWP, the model with a 30-foot working height, weighs right around 1,500 pounds when fully assembled and ready to tow. Add in a lightweight, single-axle steel trailer (about 300 pounds), and your total towed weight is roughly 1,800 pounds. Compare that to our mid-size model, which has a 40-foot working height: that AWP tips the scales at 2,200 pounds, and a small dual-axle trailer runs 500 pounds, bringing total towed weight to 2,700 pounds. Our largest towable AWP, with a 50-foot working height, weighs 3,500 pounds alone, paired with a 700-pound trailer, for a total of 4,200 pounds. Those numbers matter a lot, because they directly dictate what kind of vehicle you need.
Now, towing capacity isn’t just what the sales brochure says—you have to remember that a vehicle’s maximum towing rating is the absolute limit, not the sweet spot. It also doesn’t include things like passengers, cargo, or roof gear inside the tow vehicle. For example, if you have a half-ton pickup truck rated to tow 7,000 pounds, but you’re carrying three crew members, tools, and a cooler for the job, that’s an extra 600 to 800 pounds you’re subtracting from your available tow capacity. That’s why industry standards from organizations like the Trailer Industry Association (TIA) recommend that your total towed weight be no more than 85% of your vehicle’s maximum towing capacity. That buffer keeps you safe, prevents unnecessary wear on your brakes and transmission, and makes climbing hills or accelerating on highways way less stressful.
Let’s translate that into real vehicle recommendations. For our smallest 1,800-pound total tow load: a modern midsize SUV (like a Toyota 4Runner, Ford Explorer, or Jeep Grand Cherokee) is more than enough. These vehicles typically have a towing capacity of 5,000 to 7,000 pounds, which means they can easily handle that light load without breaking a sweat. Even a compact crossover with a factory-installed tow package (you have to make sure it’s a factory package, not an aftermarket add-on—aftermarket hitches often lower your overall capacity) will work here. I’ve seen customers use high-end full-size vans too, like a Mercedes Sprinter or Ford Transit, for small towable AWPs, which is a great option if you’re also hauling crew and tools in the same vehicle.
For our mid-size 2,700-pound total tow load: a midsize half-ton pickup truck (the Ford F-150, Chevrolet Silverado 1500, Ram 1500, or Toyota Tundra) is the sweet spot. These trucks usually have towing capacities ranging from 7,000 to 11,000 pounds, so 2,700 pounds is just a fraction of that, leaving plenty of buffer for extra gear. If you’re planning to take this AWP on highways, especially for longer trips, a half-ton is ideal—its four-wheel drive option adds traction on loose gravel or uneven job site access roads, which is common for towable AWP use. I’ve had tree service companies rely on F-150s for our 40-foot AWPs for years, and they report no issues with towing, even when carrying two crew members and their chainsaws in the truck bed.
Now, for our largest 4,200-pound total tow load: you’ll want a three-quarter-ton pickup truck, or a heavy-duty version of a half-ton with a max tow rating above 8,500 pounds. Three-quarter-ton trucks, like the Ford F-250, Ram 2500, or Chevrolet Silverado 2500, are built for heavier loads, with reinforced frames, upgraded braking systems, and more powerful engines. The 85% rule here means you need a truck with a towing capacity of at least 5,000 pounds to safely handle the 4,200-pound load. These trucks are also great if you ever need to tow additional equipment, like a air compressor or extra tools, alongside your AWP. I work with general contractors who use F-250s for our 50-foot AWPs, towing between residential job sites, and they say the stability and power make a huge difference when navigating small, steep driveways or dirt access roads.
Wait, but there’s more to it than just towing capacity. You also have to check your vehicle’s payload rating. Payload is the weight of everything that’s inside or on the truck or SUV: passengers, cargo, fuel, and the tongue weight of your trailer. Tongue weight is the downward force the trailer exerts on the hitch, and it should be 10 to 15% of your total towed weight. For our smallest load, that’s 180 to 270 pounds, for mid-size it’s 270 to 405 pounds, and for our largest it’s 420 to 630 pounds. If your truck’s payload is too low, you could end up with the back end sagging, which messes up your steering and makes the trailer hard to control. For example, if your half-ton pickup has a payload of 1,500 pounds, you have to subtract the weight of the truck itself (about 5,000 pounds for a base model), and then your available payload for people, tools, and tongue weight is around 1,000 pounds. That’s more than enough for mid-size loads, but if you’re carrying four people and 500 pounds of tools, you might be pushing it. A three-quarter-ton truck has a higher payload, so you have more flexibility here.
Another common mistake people make: not considering the type of terrain they’ll be working on. If you’re towing your AWP around flat, suburban job sites, a midsize SUV or half-ton will work fine. But if you’re working in rural areas with steep hills, muddy access roads, or uneven gravel, you’ll want a vehicle with four-wheel drive or all-wheel drive. Front-wheel drive SUVs might struggle with traction when towing up a hill on loose dirt, especially if your load is on the heavier side. That’s why I always recommend testing a tow run if you can—if you’re buying a vehicle specifically for your AWP, take it out with a small load first to see how it handles acceleration and braking.
Let’s also talk about safety equipment you’ll need, regardless of vehicle size. You can’t just hook up a hitch and go. You need a brake controller, because trailers over 1,500 pounds (which all our towable AWPs plus trailers exceed) need their own brakes. A brake controller syncs your vehicle’s brakes with the trailer’s, so you stop smoothly and avoid jackknifing. You also need trailer lights, safety chains, and a properly matched hitch ball—using a ball that’s too small or too big for your trailer’s coupler is a recipe for disaster. Our team will walk you through all of this when you’re purchasing an AWP, so you don’t have to figure it out alone.
I want to share a real example from a customer last year: a tree service company that bought our 40-foot towable AWP, and tried to use their compact crossover SUV to tow it. The SUV had a 5,000-pound towing capacity, but when they added two crew members, their tools, and the trailer, their total towed weight was over 3,000 pounds, which pushed their capacity to nearly 100%. They got stuck on a steep hill on a job site and had to call a tow truck, which cost them a day of work. We worked with them to upgrade to a used half-ton pickup with a factory tow package, and they’ve had no issues since. That’s exactly why the 85% rule isn’t just a suggestion—it’s a way to avoid unnecessary costs and downtime.
So, to wrap this up, here’s a quick cheat sheet you can use:
- 30-foot towable AWP (total tow weight ~1,800 lbs): Midsize SUV or light-duty van, factory tow package, 5,000-lb+ towing capacity
- 40-foot towable AWP (total tow weight ~2,700 lbs): Midsize half-ton pickup, 7,000-lb+ towing capacity, 4WD for off-road sites
- 50-foot towable AWP (total tow weight ~4,200 lbs): Three-quarter-ton pickup, 8,500-lb+ towing capacity, 4WD recommended
Of course, every job is different. If you’re only using your AWP on flat, suburban job sites and don’t need extra power, you might be fine with a smaller vehicle. If you’re traveling long distances over highways or working on rough terrain, upgrading a little further is a smart investment. The last thing you want is to be halfway to a job site and realize your vehicle can’t handle the load.

If you’re in the market for a towable AWP, or you’re not sure what size vehicle will work best for the model you’re looking at, our team is here to help. We’ve been supplying towable aerial work platforms for years, and we have the expertise to match you with the right AWP and the right vehicle recommendations for your specific use case. We can walk you through weight calculations, safety requirements, and even local regulations for towing, so you can make a decision that’s safe, affordable, and perfect for your work.
3-Wheel Scissor Lifts References: Trailer Industry Association. Towing Capacity Safety Guidelines, 2022; National Organization for Temporary Access and Work Platforms. Towable AWP Towing and Vehicle Specifications Handbook, 2023; Ford Motor Company. 2024 Pickup Truck Towing Capacities and Payload Ratings, 2024.
Shandong Longqing Heavy Industry Co., Ltd.
As one of the most professional elevating platform manufacturers and suppliers in China, we’re featured by quality products and good price. Please rest assured to wholesale durable elevating platform in stock here from our factory. We also accept customized orders.
Address: No.3 Shanbo Road, Hi-Tech Zone, Jining City, Shandong Province
E-mail: lqzg@lonqing.com
WebSite: https://www.longqinglift.com/