If you’ve ever worked in industries like manufacturing, HVAC, plumbing, or oil and gas, you know that pressure gauges are non-negotiable tools for keeping operations safe and efficient. But here’s the thing: pressure gauge units aren’t universal. A gauge calibrated in psi (pounds per square inch) for a U.S.-based job might need to be converted to bar for a European facility, or kPa for a medical device assembly line. As a pressure gauge supplier with 12 years in the business, I’ve lost count of how many times our customers have reached out, confused about how to convert these units correctly—because a miscalculation doesn’t just throw off readings, it can lead to costly equipment damage, safety hazards, or even regulatory non-compliance. Pressure Gauge

Let me start with the basics: pressure is force applied per unit area, and different industries and regions use standard units tailored to their needs. The most common ones you’ll encounter are psi (imperial system), bar (metric), kPa (kilopascals), mmHg (millimeters of mercury), and atm (atmospheric pressure). The key to reliable conversion isn’t just memorizing a number—it’s understanding when to use which conversion, and how to avoid common mistakes that come from mixing up direction or rounding too early.
First, let’s break down the core conversion factors you’ll use 90% of the time. I keep a cheat sheet on my desk for quick reference, and so should any team working with pressure gauges:
- 1 psi = 0.0689 bar
- 1 bar = 14.5038 psi
- 1 psi = 6.89476 kPa
- 1 kPa = 0.0145038 psi
- 1 bar = 100 kPa
- 1 atm = 14.7 psi = 1.01325 bar = 760 mmHg
Wait, let’s test that with a real example I saw last month. A customer in Chicago called, saying their new industrial compressor came with a pressure gauge reading in bar, but their existing control system is programmed for psi. They needed to know how to adjust the gauge’s scale and convert the operating pressure. The compressor’s rated maximum pressure was 10 bar. Let’s convert that to psi: multiply 10 by 14.5038, which gives ~145 psi. That’s the number they needed to enter into their system, and when they were calibrating the gauge, they could cross-check that 10 bar on the new gauge matched 145 psi on their old test gauge. Easy enough, right? But here’s where people slip up: they’ll try to convert 10 bar to psi by dividing by 0.0689 (the reverse of the conversion factor from bar to psi is to use the inverse), and get something way off. Dividing 10 by 0.0689 gives ~145, which works here, but that’s a coincidence. The right way is to multiply by 14.5038, because that’s the conversion factor for bar to psi. Always make sure you’re using the right factor for the direction you’re going—convert from the original unit to the target unit, not the other way around.
Another common mix-up is with mmHg. That unit is super common in medical settings, like blood pressure gauges, but also in some HVAC applications for measuring vacuum. For example, a vacuum pump might pull 29.92 inHg (inches of mercury), which is equal to 1 atm (atmospheric pressure). If you need to convert that to kPa, multiply 29.92 by 3.38639, which gives ~101.325 kPa—exactly the atmospheric pressure we listed earlier. A customer in Houston who services commercial refrigeration units told me last year that he once misread mmHg as psi, leading him to replace a perfectly good gauge because he thought it was reading too low. That mistake cost him $800 in parts and downtime, just because he didn’t double-check the unit labels.
Now, when should you use which unit? Let’s map that to industries, because that’s where most people’s confusion starts. In the U.S., automotive and many heavy manufacturing jobs still rely on psi, so their pressure gauges are calibrated in that. In most of Europe, Asia, and Latin America, bar or kPa are the standard, so gauges shipped there will use those. Medical devices, like blood pressure monitors, almost always use mmHg, while some high-vacuum applications use Torr (which is almost equal to mmHg, for practical purposes). The key here is: when you’re sourcing or installing a pressure gauge, confirm the unit your existing system or regulatory requirements use, then make sure the gauge you order is either in that unit, or you have the correct conversion factor on hand to calibrate it properly.
Wait, let’s talk about calibration, because that’s where conversion matters most. A pressure gauge isn’t just a dial with numbers—its internal mechanism (the Bourdon tube, or digital sensor) is calibrated to a specific unit. If you need a gauge that reads in psi but your supplier only has bar, you can’t just paint over the numbers and call it a day. That’s why conversion for gauges is more than just math—it’s ensuring that the gauge’s accuracy holds after adjusting the scale. For example, if you have a gauge calibrated to 0-10 bar, its maximum pressure is ~145 psi. If you need that same gauge to display psi, you’ll adjust the scale markers from every 1 bar to every 14.5 psi, but you have to make sure the sensor is precise enough to handle that conversion. That’s why we always recommend working with a supplier who can either provide gauges in your desired unit, or calibrate them to match your requirements—because mis-calibrating a gauge through incorrect conversion can lead to dangerous overpressurization, which is a huge risk in industries like oil and gas or chemical processing.
Let’s go over a troubleshooting scenario I’ve seen dozens of times. A customer in Toronto, who works in food and beverage processing, called last week. Their new batch fermenter had a pressure gauge set to kPa, but their old logbooks use bar. They needed to track fermentation pressure over time, so they had to convert each reading. The fermenter’s optimal operating pressure is 150 kPa. Let’s convert that to bar: since 1 bar = 100 kPa, 150 kPa is 1.5 bar. But they were worried about rounding—if they round too early, say 150 kPa is 1.45 bar, that’s a 0.05 bar difference, which might not seem like a lot, but over a 72-hour fermentation, that small error can lead to inconsistent product quality. My advice to them was to keep at least two decimal places during conversion, and verify with a portable test gauge that’s calibrated to both units, to make sure their readings line up.
Another mistake people make is mixing gauge pressure with absolute pressure. Wait, that’s a big one! Pressure gauges almost always measure gauge pressure, which is the pressure relative to atmospheric pressure. Absolute pressure adds in atmospheric pressure, so absolute pressure = gauge pressure + 1 atm. So if your gauge reads 100 psi (gauge), that’s 114.7 psi absolute. That’s a critical distinction when converting, because if you’re working with a system that requires absolute pressure, you can’t just convert the gauge reading directly—you have to add atmospheric pressure first. A customer in Denver, where atmospheric pressure is lower (~13.5 psi, since Denver is at high altitude), once tried to convert a gauge reading of 50 psi (gauge) to absolute pressure and got 64.7 psi, but that’s wrong because Denver’s atmospheric pressure is lower. He had to adjust to 50 + 13.5 = 63.5 psi absolute, which was the number his process control system needed. That’s a prime example of why understanding the type of pressure you’re measuring (gauge vs absolute) is just as important as the unit conversion itself.
Now, let’s talk about digital vs analog gauges, because conversion works a little differently for both. Analog gauges have a physical dial, so you have to adjust the scale markers when converting units. Digital gauges, though, often have a setting to switch between units, so you don’t have to do the math manually. But even with digital gauges, you should verify the conversion with a reference test gauge, because some cheaper digital models might have a slight calibration error when switching units. For example, a digital gauge that says it can go from bar to psi might be off by 0.2 psi at maximum pressure, which is enough to throw off precise processes. That’s why, as a supplier, we always include a calibration certificate with every gauge, showing the accuracy for both the original unit and any converted unit settings.
I wish I could say conversion is always straightforward, but there are niche units that add complexity. For example, in some aviation applications, pressure is measured in inches of mercury (inHg), while in meteorology, sometimes hectopascals (hPa) are used (1 hPa = 0.01 bar, or 1 kPa = 10 hPa). If you’re working with these, make sure you’re using the right conversion factors—mixing hPa and kPa will give you a 10x error, which is a huge mistake. I once had a customer in New Zealand who ordered a gauge calibrated in kPa, but his old system used hPa. He tried to convert 100 kPa to hPa, but divided instead of multiplying, and got 10 hPa, which is way too low. That led to his system shutting down unnecessarily, costing him a day of production.
So, what’s the best way to avoid conversion mistakes? First, document all your units clearly. Don’t just label a gauge “pressure”—write psi, bar, kPa, etc. Second, use a reliable conversion calculator, not just a random online tool. As a supplier, we have a custom conversion tool on our internal system that’s calibrated to NIST (National Institute of Standards and Technology) standards, so I can tell customers that any conversion from our tool is accurate. Third, whenever possible, have a certified calibration technician verify your conversions and gauge settings before putting a new gauge into service. That’s a small step that can prevent a lot of headaches.
And if you’re sourcing pressure gauges, don’t be afraid to ask your supplier about conversion support. A good supplier will not just sell you a gauge, but help you figure out the right unit, do the necessary conversions, and provide calibration to match your requirements. For example, if you need a gauge that reads in psi but you only have bar models in stock, we can recalibrate the Bourdon tube’s tension to adjust the scale, so the gauge is accurate for psi readings. That’s a service that many suppliers skip, but it’s what sets us apart for customers who have specific unit needs.
Let’s wrap this up with a quick recap: converting pressure gauge units is all about three things: knowing your conversion factors, understanding the type of pressure you’re measuring (gauge vs absolute), and verifying your results. Too often, people treat unit conversion as a trivial math problem, but it’s a critical part of ensuring equipment safety, regulatory compliance, and process efficiency. If you’re working on a project where you need pressure gauges, or you’re looking to replace or calibrate existing ones, don’t risk costly mistakes from incorrect conversions.

Reach out to us to discuss your pressure gauge needs, whether you’re looking for gauges in a specific unit, need help converting readings, or require calibration support. We can help you find the right solution for your application, and make sure your pressure measurements are accurate every time.
Submersible Sewage Pump References:
- National Institute of Standards and Technology (NIST). (2022). Guide to Pressure Unit Conversions.
- ASME B40.100-2019. Pressure Gauges and Gauge Attachments. American Society of Mechanical Engineers.
- Occupational Safety and Health Administration (OSHA). (2021). Process Safety Management: Pressure Equipment Calibration Standards.
- International Organization for Standardization (ISO) 376:2015. Metallic materials – Calibration of force-proving instruments used for the verification of uniaxial testing machines. (Relevant for pressure sensor calibration accuracy.)
Taizhou Hanner Machinery Co., Ltd.
Taizhou Hanner Machinery Co., Ltd. is one of the leading pressure gauge manufacturers and suppliers in China. We warmly welcome you to wholesale hot selling pressure gauge from our factory. All customized products are with high quality and competitive price.
Address: Southeast Industrial Accumulation, Songmen Town, Wenling City, Zhejiang, China
E-mail: kathy@cnhanner.com
WebSite: https://www.hannerpump.com/