Posted in

What are the regulations for using PC – ABS in the food industry?

What’s Up With PC-ABS Regulations in the Food Industry? From Your Go-To Supplier Who Gets It PC-ABS

If you’re someone who works with materials for food-grade applications—think: appliance housings, food container parts, even commercial kitchen equipment components—you’ve probably heard people throw around “PC-ABS” like it’s a magic material. And yeah, it is. It blends the impact resistance of polycarbonate (PC) with the moldability and cost-effectiveness of acrylonitrile butadiene styrene (ABS), so it’s way more versatile than either material alone. But here’s the thing: when it touches food, it can’t just be “good enough.” That’s where the regulations come in, and as a PC-ABS supplier who’s deep in this space, I’ve spent way too many hours digging through global rules to make sure my materials check every box. Let me break this down for you like I would chat with a fellow industry buddy.

First off, let’s get one myth out the way right now: not all PC-ABS is food-safe. I’ve had more clients call me asking, “Can I just grab the cheapest PC-ABS off the shelf for my food trays?” and I’m like, “Dude, no.” The cheap stuff might have leftover manufacturing chemicals, unregulated additives, or blends that weren’t tested for direct food contact. That’s a quick way to end up with a product that gets pulled from shelves or, even worse, leads to food safety issues. So what actually matters when it comes to regulations? Let’s start with the big ones that apply most often, because food industry rules aren’t one-size-fits-all—depends on where you’re selling your product.

First stop: the FDA in the US. That’s the Food and Drug Administration, and they set the standards for anything that touches food here. The key rules for polymers like PC-ABS are in 21 CFR Parts 170 through 186—specifically Part 177, which is for indirect food additives (plastics, rubbers, etc.). Here’s the part that trips people up: PC itself is regulated under 21 CFR 177.1580, which covers polycarbonate resins. But when you blend it with ABS, you can’t just combine those two; the finished PC-ABS has to meet the overall migration limits set by the FDA, too. Wait, what’s overall migration? Basically, that’s the total amount of stuff that leaches out of the plastic into food when it’s in contact. The FDA’s limit is something like 10 milligrams of total extractables per square decimeter of plastic surface (10 mg/dm²) for most food contact applications. Also, if you’re using additives—like plasticizers, flame retardants, or UV stabilizers—those have to be on the FDA’s approved list. I’ve seen some suppliers cut corners here: they use an unapproved flame retardant to make the plastic more durable for kitchen equipment, and boom—suddenly your material isn’t compliant.

Then there’s Europe, which has super strict food contact rules under EU Regulation 10/2011. That’s the one that covers plastic materials and articles intended to come into contact with food. Unlike the FDA, it’s a harmonized rule across all EU member states, so if you’re selling in Germany, France, Poland, wherever in the EU, this is your go-to. For PC-ABS specifically, the regulation has two big requirements: first, the finished material can’t release more than 10 mg/dm² of total migration, same as the FDA, but they also have specific limits for certain substances that are regulated individually. For example, bisphenol A (BPA)—wait, a lot of people think all PC has BPA, right? Old-school PC did, but modern food-grade PC-ABS uses BPA-free monomers. The EU has a limit for BPA in plastic food contact materials: they set a specific migration limit (SML) of 0.6 mg per kilogram of food simulants. That means if your PC-ABS touches food, you can’t have more than 0.6 mg of BPA leach into a kg of that food. Also, EU requires that you do specific migration testing with simulants—like water, 3% acetic acid (for acidic foods like salad dressing), 10% ethanol (for alcoholic drinks), and vegetable oil (for fatty foods)—because different foods leach chemicals at different rates. I’ve had clients test only for water and get in trouble when their fatty food contact part fails the oil simulant test. Oops.

Don’t forget about other regions, either. If you’re selling in Asia, for example, China’s GB 4806.7 standard is the one for plastic food contact materials. It lines up pretty closely with EU 10/2011 and FDA rules, but they have some specific limits for certain additives that are different. And Japan has the Food Sanitation Law, which also has its own testing requirements for migration and specific substances. As a supplier, I make sure all our PC-ABS batches are tested to all these major standards, because I’ve had a client who thought EU compliance was enough for Japan and their product got held at customs. That’s a mistake you don’t want to make.

Now, let’s talk about the common pitfalls that even people who’ve been in the industry for years mess up when it comes to PC-ABS for food use. First, recycled content. Wait, a lot of brands want to use post-consumer recycled (PCR) plastic to hit sustainability goals, but can you do that for food contact? The FDA and EU both have rules for recycled plastics. For example, FDA allows PCR plastics for food contact, but only if the recycling process is approved and eliminates any contaminants that could be left from the original use. The EU is stricter, especially for PCR, because they’re worried about cross-contamination. I get inquiries all the time for PCR PC-ABS, and I have to be honest: most standard recycled PC-ABS can’t be used for food contact because it’s hard to ensure there are no leftover chemicals or bacteria from previous uses. There are some specialized recycled grades, but they’re way more expensive and have to go through extra testing. That’s a big one—if you’re using recycled PC-ABS without checking the compliance, you’re opening yourself up to recalls.

Another pitfall: additives. PC-ABS is a blend, so you’re adding not just the base polymers, but also stabilizers, mold release agents, flame retardants, colorants, and maybe fillers. Every single one of those additives has to be approved for food contact in the regions you’re selling in. For example, some cheap mold release agents are okay for industrial use but not for food. I once had a supplier’s batch of PC-ABS fail testing because they used a colorant that wasn’t on the FDA’s list—we had to rework the entire batch, and it was a huge hassle for both of us. Lesson learned: I never cut corners on additive approvals. Also, if you’re using PC-ABS for applications that get hot—like a toaster housing or a microwave part—you have to test migration at elevated temperatures too, right? Because heat makes more chemicals leach. A lot of people only test at room temperature, which means their hot-use parts fail. That’s another mistake.

Wait, what about different types of food contact? Direct vs. indirect. Direct food contact is when the plastic actually touches the food—like a food storage lid. Indirect is when it’s near food but not touching, like the outer housing of a coffee machine. The rules are different for both. For direct contact, the migration limits are strict, and you have to make sure every part of the material is food-safe. For indirect, they’re a bit looser, but you still can’t have leachables that are harmful. I’ve had clients ask, “Can I use industrial PC-ABS for a machine housing that’s near food?” and I’ll say, “Indirectly, maybe, but you still have to check if any additives could transfer via vapor or whatever to the food.” So even indirect use isn’t a free pass.

Now, as your PC-ABS supplier, here’s what I do to make sure every batch we ship is compliant, because that’s what matters to you. First, we source only base polymers and additives that are explicitly approved by FDA, EU, and other major regions. No cutting corners there. Then, every production batch of our food-grade PC-ABS goes through third-party testing—we use labs that are ISO 17025 accredited, so their results are recognized everywhere. The tests include overall migration, specific substance limits (BPA, heavy metals, etc.), and sometimes simulant testing for different food types, depending on the application. We also provide a Certificate of Compliance (CoC) with every batch, so you can show regulators or retailers that your material is legit. That’s a big thing—retailers and auditors want that CoC, so don’t skip getting it.

But wait, regulations change all the time, right? A few years back, the EU updated their rules on certain phthalates, and I had to adjust our material specs quickly. More recently, the FDA has been looking at certain flame retardants, so I had to switch a couple of our additive lines to stay compliant. That’s why a good supplier doesn’t just sell you a material and ghost you—they keep you in the loop on new regulations. I send my clients quick updates whenever there’s a change that affects PC-ABS, because I know how much a last-minute rule update can mess up a product launch.

Let me also address a common question I get: “Is food-grade PC-ABS BPA-free?” Most of the time, yes, but not all. The old-school PC-ABS that used standard bisphenol A-based PC did have BPA, but modern food-grade grades use BPA-free polycarbonate monomers. That’s why you have to make sure your supplier specifies BPA-free if that’s a requirement for your market. For example, some countries have strict limits on BPA for baby food containers, so if you’re making a kids’ snack container, BPA-free is non-negotiable. As a supplier, we label all our food-grade PC-ABS clearly—whether it’s BPA-free, meets FDA, meets EU, etc.—so you don’t have to guess.

Now, what happens if you use non-compliant PC-ABS? Let’s be real, it’s not just a slap on the wrist. You could face a product recall, which is costly—like, millions of dollars in lost inventory, rework, and damage to your brand. You could get fined by regulatory agencies, or even have your product banned from sale in a region. I once had a small food equipment brand that used non-compliant PC-ABS for their oven parts—their product got pulled from Amazon and every major grocery store, and they almost went under. That’s why compliance isn’t just a box to check; it’s the foundation of your business when you’re working with food.

So if you’re in the market for PC-ABS that’s actually compliant for food industry use, you don’t want to just pick any supplier. You want someone who knows the ins and outs of FDA, EU, and other regional rules, has a track record of compliant batches, and is transparent about their testing. I’ve been supplying PC-ABS for food applications for over 10 years, and I’ve seen every mistake there is—so I’m here to help you avoid them. Whether you’re making food storage containers, kitchen appliances, beverage dispensing equipment, or any other food-related part, I can help you find the right PC-ABS grade that checks all the regulatory boxes, fits your budget, and works for your application.

Don’t risk your product, your brand, or your customers’ safety on generic PC-ABS. Hit me up to chat through your specific needs—we can go over the regulations that apply to your region, the right material grade, and make sure everything is ready for compliance. Let’s make sure your next food-related product is both high-performing and totally safe.

HIPS Fire Resistant Sheet References
U.S. Food and Drug Administration. (n.d.). 21 CFR Part 177 – Indirect food additives: Polymers.
European Commission. (2011). Regulation (EU) No 10/2011 on plastic materials and articles intended to come into contact with food.
National Health Commission of the People’s Republic of China. (2016). GB 4806.7-2016 National food safety standard – Food contact plastic materials and products.
Ministry of Health, Labour and Welfare of Japan. (n.d.). Food Sanitation Law, Notification No. 537 of 2000, Standards for Food Additives, etc.


Yangzhou Chengsen Plastics Co., Ltd.
Yangzhou Chengsen Plastics Co., Ltd. is one of the leading pc-abs manufacturers and suppliers in China, supporting good wholesale and customized services. Welcome to buy discount pc-abs in stock here and check price with our factory.
Address: West Of Fenghuang Island Road,Tai’an Town,Yangzhou,Jiangsu,China
E-mail: info@absgoods.com
WebSite: https://www.absgoods.com/