Posted in

Can a double screw pump be customized?

As a double screw pump supplier, I get this question all the time when I’m out at industry trade shows, on client calls, or even when replying to emails that come through our website: “Can a double screw pump be customized?” For anyone who’s worked with fluid handling equipment before, this isn’t a trivial question. A pump that works fine moving clean water might fall flat when it’s moving thick, abrasive slurry, or viscous food-grade syrup, or even high-pressure crude oil. Over the past 12 years I’ve been in this business, I’ve seen too many companies waste time and money trying to force a one-size-fits-all pump into a job it wasn’t built for. That’s why I want to pull back the curtain on how custom double screw pumps work, what we can adjust, and why this matters so much for so many industries. Double Screw Pump

First, let’s get the basics straight for anyone who might not be super familiar with how double screw pumps function. At their core, these pumps use two intermeshing screws—opposite threads, housed in a precision-machined casing—to move fluid without valves, which makes them gentle on shear-sensitive materials, good for high-viscosity substances, and reliable even with varying flow rates. But the default off-the-shelf model we stock in our warehouse is just that: a baseline design built to handle a wide range of general applications. Customization means tweaking that design to match a client’s exact operating parameters, not just what a catalog says will work.

A big part of what makes custom double screw pumps possible is the modular nature of their components. Let’s start with the screw profiles. The standard screw pitch and diameter we use for most general applications work for water or light oil, but if a client needs to move a material that’s 100,000 centipoise (that’s 200 times thicker than motor oil) like molasses, or even high-molecular-weight polymers, we can adjust the screw lead. A shorter lead creates a tighter seal between the screws, which builds more pressure and prevents the thick fluid from leaking back through the pump. For abrasive materials like mining slurry, we can also alter the root diameter of the screws to add more metal in the high-wear areas, or even apply a hard coating like tungsten carbide that resists scratching. Last year, a mining client in Alberta came to us because their standard pumps were wearing out in 6 months from sand in their slurry; we customized the screws with a tungsten carbide overlay, and now those pumps run for over 18 months before needing service. That’s not a small difference—for them, that cut pump replacement costs by 60% and reduced downtime that would have shut down their extraction line.

Then there’s the casing, the part that houses the screws. Standard casings are usually cast iron or standard stainless steel, but for specific fluids, we can change the material entirely. Food and beverage clients, for example, can’t use pumps that leach chemicals or have crevices where bacteria can grow. For those jobs, we use 316L stainless steel, which is non-reactive with food acids and easy to sanitize in a CIP (clean-in-place) system. We’ve even customized casings for pharmaceutical clients that are electropolished, a process that smooths out every surface so there’s no place for residue to build up. That’s a big deal for companies that need to meet FDA standards, which one of our pharma clients told us was non-negotiable. If we’d tried to sell them a standard off-the-shelf pump, it would have failed inspection on its first audit. Custom casing is also useful for high-temperature applications: if a client is moving molten asphalt at 400 degrees Fahrenheit, we can line the casing with a heat-resistant alloy instead of standard steel, which would warp or break down at that temperature.

Don’t get me wrong—customization isn’t just about materials and parts; it’s also about matching the pump to the rest of a client’s system. I’ve had clients come to me saying they need a pump that fits into an existing skid that’s only 3 feet wide, or that connects to a pipe with a non-standard flange size, not the 4-inch or 6-inch sizes we stock in bulk. Those are small adjustments, but if we can’t make them, a client has to either rework their entire system or buy a pump that’s a bad fit. Last quarter, a chemical processing client in Texas was installing a new line and their existing pipe inlet was a 5-inch flange, not the standard 4-inch. Our engineering team machined a custom adapter flange to fit their existing piping, so they didn’t have to delay their installation to modify the pipework. That’s the kind of small, practical customization that makes a big difference for a business’s timeline and budget.

But here’s the thing I want people to understand: not every “custom” request is a total redesign from scratch. There’s a spectrum, and we work with clients to figure out what they actually need, not just what sounds fancy. For some, it’s just changing a shaft seal to handle a specific fluid that would eat through a standard mechanical seal. For others, it’s adjusting the pump’s displacement (how much fluid it moves per rotation) to match a precise flow rate for a dosing application, like adding a specific amount of additive to a base chemical. We even do custom motor mounts for clients that need to mount the pump horizontally or vertically, which is important for space-constrained plants.

I’ve seen a lot of people think that custom pumps are way more expensive than off-the-shelf ones, and in some cases that’s true—if it’s a totally unique design, the upfront cost is higher. But the long-term savings almost always add up. A friend who runs a biofuel plant told me he switched from off-the-shelf to a customized double screw pump 3 years ago. Before that, his pumps would seize up every 3 months when moving bioethanol, because the standard seals couldn’t handle the alcohol’s corrosive properties. The custom pump we built him with a PTFE seal has run flawlessly, and he calculates he’s saved over $120,000 in replacement parts and downtime in that time. That’s the value of customization: it’s not just building a pump, it’s solving a specific problem that a one-size-fits-all model can’t address.

Of course, there are limits to what we can do, and I’m upfront with clients about that. We can’t build a double screw pump that moves liquid metal at 2,000 degrees Fahrenheit, for example—there aren’t many materials that can handle that, and even if there were, the engineering to keep the screws intermeshing perfectly at that temperature is beyond our current capacity. But for 95% of the fluid handling applications we see—from food and beverage, to oil and gas, to mining, to pharmaceuticals—we can customize a pump that works better than any off-the-shelf option. The key is that we start with a consultation: we ask clients to bring in their process specs, the fluid they’re moving, the operating temperature, pressure, and even the room they have to fit the pump. Our in-house engineering team goes over all that and presents a design that’s tailored exactly to their needs.

I also think it’s important to address a common misconception that custom pumps have longer lead times. When I started in this business, that was true—you’d have to wait 12 weeks or more for a custom build. But with modern machining technology—CNC mills, precision screw threading machines, and 3D printing for prototypes—we’ve cut that lead time down to 4 to 6 weeks for most custom orders. We still build our pumps to last, mind you; we test every custom unit in our test lab before it leaves our facility, running it through 24 hours of continuous operation at the client’s specified pressure and flow rate to make sure it doesn’t fail. That quality control is non-negotiable, even for a customized pump.

Another area where customization shines is for clients with unique regulatory requirements. For example, clients in the food industry often need pumps that are USDA-certified, while aerospace clients need parts that meet AS9100 standards. We’ve customized pumps for both, modifying materials and manufacturing processes to meet those specific certifications. A craft brewery client in Oregon came to us because they needed a pump to move their hoppy beer without breaking the hop buds—standard pumps would shear the hops, leaving a bitter taste. We adjusted the screw profiles to move the fluid more gently, keeping the hop integrity intact, and now they use our custom pumps for all their transfer lines. That’s the kind of specialized adjustment that off-the-shelf pumps can’t make, because they’re built for general use, not for the delicate needs of craft beer.

I’ve also had clients come to us with projects on a smaller scale, not just big industrial operations. A small biotech startup was developing a new protein-based drug and needed a pump that moved a highly viscous serum without damaging the protein molecules (shearing would break the protein, making their drug ineffective). We worked with their R&D team to build a small-scale custom double screw pump, just 2 inches in diameter, that was gentle enough to move the serum at 500 centipoise. That startup is now scaling up their production, and they’re still using our custom pumps at their new facility. It doesn’t matter if you’re a multi-billion dollar mining company or a startup with a prototype—customization works for all sizes.

At the end of the day, the question “Can a double screw pump be customized?” isn’t just a yes or no answer. It’s a conversation. It’s about understanding what a client is really trying to do, not just what their spec sheet says. As a supplier, I don’t just sell pumps—I solve fluid handling problems. If a standard pump will do the job, we’ll tell a client that, no need to spend extra on something they don’t need. But when a standard pump would lead to downtime, high replacement costs, or even product quality issues, we’ll build a custom solution that fits exactly what they need.

If you’re dealing with a fluid handling challenge where off-the-shelf pumps haven’t worked, or if you have a specific application that just doesn’t match a catalog pump, I’m here to help. Reach out to our team to talk through your project, share your requirements, and see how we can build a customized double screw pump that works for you. We’ll walk through every step, from initial consultation to final testing, to make sure you get a pump that’s reliable, efficient, and tailored to your operation.

High-pressure Reciprocating Pump REFERENCES

  1. ISO 13346: Petroleum and natural gas industries – Screw pumps
  2. FDA 21 CFR Part 110: Current good manufacturing practice in manufacturing, processing, or holding of food
  3. Hydraulic Institute Standards for Positive Displacement Pumps
  4. ASME B73.1: Specification for Horizontal End Suction Centrifugal Pumps for Chemical Process

DEPAMU (Hangzhou) Pumps Technology Co., Ltd.

Address: No. 658, 20th Street, Hangzhou Economic & Technological Development Zone, Hangzhou City, Zhejiang Province, China
E-mail: international@depamu.com
WebSite: https://www.depamupumps.com/