Posted in

Are corrugated steel roofing sheets suitable for snow areas?

If you’re a supplier of corrugated steel roofing sheets, you’ll know that one of the most common questions we get from customers in northern regions or mountain towns isn’t just about cost or installation—it’s about whether our product can stand up to heavy snow. Snow loads don’t just add weight to a roof; they can damage shingles, warp weak materials, or even lead to costly structural issues if the roofing system isn’t up to the task. After 12 years in the corrugated steel roofing industry, I’ve seen this question come up dozens of times: Are corrugated steel roofing sheets suitable for snow areas? The short answer is yes—but only when you factor in the right specifications, installation methods, and regular maintenance that align with snow’s unique properties. Corrugated Steel Roofing Sheets

First, let’s break down what makes snow a challenge for roofing. A lot of people underestimate how heavy snow can be. Fresh, light powder weighs about 5 pounds per square foot, but wet, packed snow (which is common in areas with frequent snowfall that melts and refreezes) can hit 20 pounds per square foot, and ice, a close cousin, can jump to 60 pounds per square foot. Building codes for snow load vary by region—for example, parts of Vermont or Colorado require roofs to handle up to 50 pounds per square foot, while milder climates might only need 20. Corrugated steel’s core strength here is its tensile strength: a properly manufactured steel sheet can easily support loads far above those numbers, which is why it’s been a go-to for barns, industrial warehouses, and residential homes in snow-heavy areas for decades.

But not all corrugated steel is created equal. That’s why as a supplier, we make a point to educate customers about the two key specs that matter most for snow regions: steel gauge and coating thickness. Gauge refers to the thickness of the steel itself—lower gauge numbers mean thicker, sturdier material. For light snow areas (where snow load is under 20 pounds per square foot), 26-gauge corrugated steel works well. But for regions that get heavy, wet snow or ice, we recommend 24-gauge or even 22-gauge. The difference might seem small (24-gauge is about 0.02 inches thinner than 22-gauge), but it translates to a 15% higher load capacity, which can mean the difference between a roof that holds and one that sags under the weight of a 2-foot snow drift along your eaves.

Coating is another make-or-break detail. Galvanized steel, which is coated with a layer of zinc to resist rust, is standard for most roofing, but for snow areas, we often suggest a thicker galvanization layer—called G90, which means 0.9 ounces of zinc per square foot, instead of the thinner G60. Why? Snow and ice can trap moisture on the roof for weeks at a time, especially if there’s poor airflow in the attic. A thicker zinc coating prevents rust from forming, which would weaken the steel over time and make it more prone to damage. We also offer pre-painted corrugated steel for customers who want a polished look, but we always pair that with a baked-on polyurethane coating that resists snow melt runoff, road salt, and ice dams—issues that are way more common in cold climates than in mild areas.

Now, even the best corrugated steel won’t perform well if it’s installed wrong. That’s a lesson I learned early on: a customer in northern Michigan installed 26-gauge sheets incorrectly, with too few fasteners along the eaves, and last winter, a 3-foot snow drift pulled a section of roofing loose. So what’s the right installation for snow areas? First, the slope of the roof matters. Corrugated steel works on slopes as low as 3:12 (meaning 3 inches of rise for every 12 inches of run), but for snow-heavy regions, we recommend a minimum slope of 4:12. A steeper slope helps snow slide off faster, reducing the amount that accumulates on the roof. If a customer needs a lower slope for aesthetic reasons, we can also recommend adding a snow guard system—little brackets that attach to the roof to hold snow in small, manageable piles instead of letting it slide off all at once, which could damage gutters or people below.

Fasteners are another critical installation detail. We always suggest using heavy-duty, stainless steel fasteners with rubber gaskets, not the standard galvanized ones. Rubber gaskets create a watertight seal that prevents meltwater from seeping into the gaps between sheets, and stainless steel doesn’t corrode when exposed to snowmelt mixed with road salt, which is a big issue in areas that plow roads in winter. We also advise customers to space fasteners 12 inches apart along the ridges and 18 inches along the sides, instead of the 24-inch spacing we recommend for mild climates. That extra spacing might seem like overkill, but it distributes the weight of snow more evenly across the sheets, preventing sagging or warping.

Another common misconception is that corrugated steel roofs are too noisy in snow. I get this question all the time from residential customers who are worried about hearing snow pound on their roof all night. The truth is, modern corrugated steel is much quieter than older, thinner models. If you’re concerned, we offer options like foam-back corrugated steel— a layer of closed-cell foam attached to the underside of the sheets that absorbs sound. We’ve tested this product in homes in northern Minnesota, and customers report that it’s nearly as quiet as asphalt shingles during a snowstorm.

Of course, no roofing material is maintenance-free, and that’s especially true for snow areas. Corrugated steel is low-maintenance compared to other materials, but a few simple steps will extend its lifespan in snow regions. First, clear heavy drifts from the roof after major snow events—especially drifts along the eaves, where snow tends to pile up. We always advise customers to use a plastic roof rake, not a metal one, to avoid scratching the steel and damaging the coating, which can lead to rust. Second, check the attic insulation: if insulation is too thin, warm air from the house can melt snow from below, leading to ice dams. Ice dams are a major problem because they can pull away roofing materials and trap water under the sheets, causing leaks. Finally, inspect the fasteners and coating every spring—after the snow melts, you can fix any loose fasteners or touch up small areas of chipped coating before they turn into bigger issues.

I want to be clear: corrugated steel isn’t the right choice for every snow area. If you’re in a region that gets more than 5 feet of snow a year, or if your roof has a very low slope (less than 3:12) and you can’t adjust it, you might want to talk to a structural engineer to confirm that the roof framing can support the steel’s weight. But for most customers in temperate snow regions—think the upper Midwest, New England, or parts of the Pacific Northwest—corrugated steel is not just suitable; it’s a long-lasting, cost-effective choice. We’ve had customers in Maine who installed 22-gauge G90 steel roofs in 2010 and haven’t had any major issues, even during the blizzard of 2022 that dumped 30 inches of snow in 24 hours.

As a supplier, we don’t just sell sheets—we work with customers to customize their order for their specific location. For example, a farmer in Wyoming might need heavier gauge steel to support snow drifts from adjacent fields, while a homeowner in Oregon might choose a lighter gauge for a residential shed. We also offer free load calculations for customers who aren’t sure what they need, based on the average snow load in their area.

At the end of the day, the key to corrugated steel’s success in snow areas is matching the product to the conditions. Too often, customers assume all roofing steel is the same, but a 26-gauge sheet that works in Atlanta won’t hold up to a Michigan winter. That’s why it’s important to work with a supplier that understands the unique needs of snow regions, not just someone who sells the cheapest sheets. If you’re in an area with heavy snow and you’re considering corrugated steel, reach out to us to discuss your project, get a custom quote, and make sure your roof is built to last through even the harshest winter.

Standing Seam Siding References

  1. International Code Council. (2021). 2021 International Building Code: Snow Load Requirements for Roof Structures.
  2. Steel Roofing Manufacturers Association. (2022). Performance Guidelines for Corrugated Steel Roofing in Cold and Snow-Prone Climates.
  3. U.S. Department of Agriculture. (2020). Agricultural Roofing Solutions for Northern Climates: Durability and Maintenance Best Practices.
  4. National Association of Home Builders. (2021). Cold Climate Roofing: Evaluating Steel and Asphalt Shingle Performance in Snow Load Conditions.

Hangzhou Rymor New Building Materials Co., Ltd.

Address: Room 1201-1202, Building 2, Powerlong Plaza, Gongshu District, Hangzhou City, Zhejiang Province, China
E-mail: 2329504127@qq.com
WebSite: http://www.rymormaterials.com/